Installing Batteries In The Remote Control; Using The Remote Control; Handling The Remote Control - Yamaha AX-497 Manual De Instrucciones

Ocultar thumbs Ver también para AX-497:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONTROLS AND FUNCTIONS
Installing batteries in the remote
control
1
3
1
Open the battery compartment cover.
2
Insert two supplied batteries
(AAA, R03, UM-4) according to the polarity
markings (+ and –) on the inside of the
battery compartment.
3
Close the cover back.
Notes on batteries
• Change all of the batteries if you notice the following
conditions; the operation range of the remote control decreases,
the indicator does not flash or its light becomes dim.
• Use AAA, R03, UM-4 batteries.
• Make sure that the polarities are correct. See the illustration
inside the battery compartment.
• Remove the batteries if the remote control is not used for an
extended period of time.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.
• We strongly recommend using alkaline batteries.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not throw away batteries with general house waste; dispose
of them correctly in accordance with your local regulations.
6
2

Using the remote control

The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the front panel of this unit during
operation.
STANDBY
POWER
AUX
ON
OFF
INPUT
PHONES
SPEAKERS
A
B
STANDBY
/ON
ON
OFF
30
30
POWER
CD/DVD
PHONO
TUNER
STANDBY
MD
TAPE
AUX
+
u
VOLUME
PRESET
d
A/B/C/D/E
MUTE
A/B
DISPLAY
w
e
f
DISPLAY
DIR A
DIR B
REC
b
s
a
DISC
CD
TAPE
p

Handling the remote control

• The area between the remote control and this unit must
be clear of large obstacles.
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a heater or
a stove
– places of extremely low temperatures
– dusty places
• Do not expose the remote control sensor to strong
lighting, in particular, an inverter type fluorescent
lamp; otherwise, the remote control may not work
properly. If necessary, position this unit away from
direct lighting.
MD
TAPE
CD/DVD
TUNER
PHONO
PURE DIRECT
CD/DVD DIRECT AMP
16
16
20
20
12
12
VOLUME
26
26
8
BASS
TREBLE
BALANCE
LOUDNESS
REC OUT
1
1
1
1
1
1
1
FLAT
TAPE
CD/DVD
TUNER
–30dB
2
2
2
2
2
2
2
10
40
40
4
MD
PHONO
3
3
3
3
3
3
3
9
AUX
4
4
4
4
4
4
4
8
5
5
+
5
5
+
L
5
5
R
5
7
60
60
2
6
0
-dB
-dB
Approximately 6 m (19.7 ft)

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ax-397

Tabla de contenido