Medel ELITE Instrucciones De Uso página 62

6. Initial use
6.1. Inserting the batteries
Insert the batteries.
1. Remove the battery
cover from the bat-
tery compartment.
2. Insert four AA pow-
erful batteries into
the compartment and
ensure each battery
is in the proper di-
rection.
3. Replace the battery
cover.
CAUTION!
• After the battery warning symbol "
vice is blocked until the batteries have been replaced.
• Please use "AA" long life 1.5 batteries.
• Never leave any low battery into the battery compartment
since they may leak and cause damage to the unit.
• If the blood pressure monitor is left unused for long peri-
ods, please remove the batteries from the device.
• The typical service life of the new and unused batteries is
192 measurements for the operation time which is 60 s.
6.2 Clock and date adjustment
1. Once you install the battery or turn off the monitor, it will
2. In Clock Mode, press the O/I and
3. Press O/I button to confirm and
4. Repeat the procedure described
5. Once you change the batteries,
" appears, the de-
6.3 Connecting tube
Insert the cuff connector into the
socket on the left side of the meter.
62
enter Clock mode, and LCD will display date and time.
MEM buttons simoultaneously for
2 seconds and the year value will
blink first. Press MEM button to
set the year. Keep the MEM
button pressed to increase the
numbers.
move on to the month
above to set the day, hour and
minutes.
you should readjust the time and
date.