vivi M026TGB Manual De Usuario página 12

5.1.2.2 Unscrew 4 screws on the valve rod cover with the tool No. 2 (M4 wrench). Rotate
the handlebar until it is perpendicular to the bike frame; attach the valve rod
cover to the handlebar tightly. Then, re-install the valve rod with 4 screws; then
tighten the screws with the tool No. 2 (M4 wrench).
5.2 Installation of front wheel
Applicable to models M026TGB/M026SH/26LGB/H6/H7/H8/MT26H
5.2.1 Release the fixing rod of front
fork with the tool No. 8 (M17
wrench) and remove it (this
part is to prevent deformation
of front fork during delivery)
5.2.2 Put the front wheel into front fork. Fix the front fork hanger on the axle and put
t h e b r a k e d i s c i n
the middle of brake.
Tighten the screws
on both sides with
the tool No.7 (M15
wrench).
8