REDEX DRP+1 Manual De Usuario página 32

7 RACK & PINION LUBRICATION: OPTIONAL LUBE PINION (PGRP) AND LUBE PINION
SUPPORT (SFRP)
7.1 Description of the PGRP & SFRP option
The rack and the pinions must be adequately lubricated to maintain
the gear quality and ensure a long lifetime. We recommend using
the polyurethane foamed pinions (PGRP) that meshes with the rack.
The SFRP is a support plate that holds the felt gear and brings the
lubricant to the centre of the felt gear.
The lubricant inlet is a fitting for tube Ø6 x Ø4.
The front face of the DRP+ housing has got two thread holes to
mount it.
7.2 Recommended lubricants
We recommend the following lubricants for rack and pinions lubrication:
Trade mark
DLS Schmiersysteme
If you use the old version of the lube pinion (FGRP – felt pinion), we recommend the following lubricants:
Trade mark
MOBIL
ARAL
BP
Texaco
For other lubricant please consult us. The lowest recommended viscosity is 220 Cst. Lubricants with
lower viscosity may be absorbed by capillary action into the felt pinion; this could empty the reservoir and
create an irregular lubrication cycle.
7.3 Oil flow rates
Determine and set the minimum oil flow rate to feed the lubrication gear using following graph (DLS
Schmiersysteme F01, F02 lubricants):
Reference
F01 or F02
Reference
Mobil Glycol 460 HE
Degol GS 460
Energol SG-XP 460
Pinnacle 460
This document must not be reproduced nor information therein disclosed without our authorization
DRP+ User manual
Trade mark
SHELL
ICI / TRIBOL
KLÜBER
Ref.: RX182/009
Version 01/2017 - English
PGRP
Reference
Tivela Oil S 460
Tribol 460
Klübersynth GH6-220
Structovis EHD 460
Page 30 / 30
SFRP