REDEX DRP+1 Manual De Usuario página 4

1 INTRODUCTION
The DRP+ planetary gearbox will give you complete satisfaction if all the following mounting, operating &
maintenance instructions are respected.
1.1 Warnings
1.2 Gearbox identification
Each unit can be identified through its identification plate and the serial number indicated on it. The serial
number must be given for any correspondence on a particular unit.
Serial number
Drawing code
Designation
1.3 Long term storage
Each gearbox is delivered wrapped and greased for 1 month anti-corrosion protection. Gearboxes which
are not installed shortly after receipt should be stored in a dry atmosphere with temperature between 0°C
& 40°C. The unit must be filled completely with oil for storage.
WARNING! HANDLING OPERATIONS.
Never handle the DRP+ unit with bevel gearbox shafts. Use lifting rings fixed in the
universal housing, as shown on the pictures below. Any improper handling will void the
warranty.
WARNING! LUBRICATION REQUIREMENTS.
The rack and the output gears must be lubricated before running the DRP+. The DRP+ is
delivered WITHOUT OIL and has 2 independent lubrication circuits.
Refer to lubrication chapter in this manual to respect all lubrication requirements.
Any improper lubrication will void the warranty.
This document must not be reproduced nor information therein disclosed without our authorization
DRP+ User manual
861606
RX129702-12
DRP4+M.31.3.H
Ref.: RX182/009
Version 01/2017 - English
Shipment date
NOV. 2016
Reduction ratio
31
Backlash (if
needed)
Page 2 / 30