Publicidad
Idiomas disponibles
Idiomas disponibles
FILLING THE WATER TANK
― ―
For the cooling mode to function the
appliance's water tank requires filling. Ensure
fresh water is added to the water tank prior to
every use.
To fill the water tank:
1.
Turn off the appliance and unplug it from
the power socket.
2.
Turn the water tank locking clip clockwise
90 degrees and gently pull the water
tank out until it stops.
3.
Turn the water pump locking clip
clockwise 90 degrees, detach the water
pump from its fitting, and remove the
water tank.
4.
Fill the water tank with fresh water to the
max line. For enhanced cooling add ice
cubes and/or the two ice packs to the
water tank also.
5.
Slot the water tank back into position
and attach the water pump to its fitting
turning the water pump locking clip
counterclockwise 90 degrees to fully
secure.
6.
Push the water tank back in fully
and turn the water tank locking clip
counterclockwise 90 degrees to fully
secure.
Notes:
•
If the water level is too low three beeps
will sound and the cooling mode
indicator will continue to flash until
cooling mode is turned off and/or the
water tank has been refilled with water.
•
Place the ice packs in a freezer for at
least four hours prior to use.
•
Do not fill the water tank over the max
line or below the min line.
English | 11 of 88
Publicidad
