Parkside PBS 600 A1 Instrucciones De Utilización Y De Seguridad página 36

Introduction
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
n
Rated idle running speed
0
V ~
Voltage
Belt sander PBS 600 A1
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. To help you do this please read the accom-
panying operating instructions. Keep these instructions
in a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.
Proper use
Q
The belt sander is designed for dry sanding of large
surfaces of wood, plastic, metal, plaster and painted
surfaces. The device may only be used for dry sand-
ing. Always use a sanding belt and grade of grit
suitable for the particular surface you are sanding.
The speed selected should also be appropriate for
the material. The device is not intended for com-
mercial use. Any other use or modification to the
device shall be considered as improper use and
could give rise to considerable dangers. The manu-
facturer will not accept liability for loss or damage
arising from improper use.
36 GB/MT
All manuals and user guides at all-guides.com
W
Q
1
2
3
4
5
6
7
8
9
10
11
12
13
Q
1 Belt sander PBS 600 A1
1 Sanding belt
1 Dust collection box
1 Vacuum extraction adapter and reducer piece
2 Clamps
1 operating instructions
Watts (Effective power)
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from electrical
power tools!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
Dispose packaging and appliance in
an environmentally-friendly way!
Features and equipment
Belt speed adjuster wheel
Recesses for clamp mounting
on / oFF switch
Lock button for on / oFF switch
Dust box
Release button for dust box
Belt adjuster screw
Sanding belt
Adapter port
Tensioning lever for sanding belt
Clamps
Adapter for external vacuum extraction
Reducer piece
Included items
(for external vacuum extraction)