contained in this manual.
Any other use or use that goes beyond this is deemed improper use. The
company operating the product is solely responsible for any damage
resulting from it. This also applies to unauthorised modifications to the
product.
3.4 Reasonably foreseeable misuse
No reasonable, foreseeable misuse is possible that could lead to dangerous
situations with personal injury when working with the product whilst
adhering to its intended use.
The operation of the product in industrial areas that do not comply with
the requirements for explosion protection is not permissible. Furthermore,
the operation is prohibited for:
1. Processes that are not in the intended use list and in which the
extracted air is:
•
mixed with flying sparks, e.g. from grinding and welding processes;
•
mixed with liquids and the resulting contamination of the air flow with
vapours containing aerosols and oils;
•
mixed with highly flammable, combustible dusts and/or with
substances that can form explosive mixtures or atmospheres;
•
mixed with other aggressive or abrasive dusts;
•
mixed with organic, toxic substances/parts of substances;
2. Outdoor locations where the product is exposed to weather conditions –
the product must only be used in closed buildings.
3.5 Markings and signs on the product
Various markings and signs are affixed to the product. If these are
damaged or removed, please replace them immediately with new ones in
the same location.
The operating company is obliged to post further markings and signs on
the product and the surrounding area if necessary.
Such notes and signs might be related, for example, to the requirement for
wearing personal protective equipment.
In the country of use, additional required safety instructions and
pictograms can be provided by the manufacturer in accordance with
applicable law.
1502778-02
- 66 -
EN