Publicidad
Idiomas disponibles
Idiomas disponibles
Thread size
M12
Type
Highbond
anchor
6. In the next step, screw the removed parts of the start-up protection
(item 5) back onto the fan unit (item 1).
7. Lift the filter unit (item 2) by the eyebolts using a suitable carrying
harness, place it on the fan unit (item 1) and connect it to the clamping
1502778-02
Minimum depth
of the drill hole
130 mm
Description
FHB dyn
12x100/25
Tab. 16: Fixing material
Fig. 31: Assembling the filter unit
- 75 -
Minimum
anchoring depth
100 mm
Tightening
torque
40 Nm
EN
Manufacturer
Fischer dowel or
similar
With concrete
quality
Reinforced
concrete C25/30
Publicidad
