Babify Onboard Swivel 360 Manual De Instrucciones página 56

EN
56
Rotate the seat to rearward. Adjust
the angle to rearward position.
Install the isofix interface
Hook the tether strap hook onto
the anchorages. Pull the strap on
another end back to tighten the top
tether.
(If the top tether is tightened
favourably and correctly, a green
mark will turn up on the other end of
the strap release button, please do
check it.)
Suitable for all stages
Please pay attention to the car seat
harness and vehicle safety belts.
Make sure it is stretched as low as
possible over the child's hips.
Find the anchorages, choose one in
your favour, convert the top tether
to rearward, pull it out until it is long
engough.
Grasp the seat body to check the seat
if it is fastened tightly or shakes.