Star Power AS01 Manual De Usuario página 5

03 Assembly
Step 2
Unfolding the frame: follow the demonstration below, hold the column with your hands and pull up slowly in the
direction of the arrows, and use B# (T-shaped Allen Key Wretch) to fasten the bolts in the main frame in the direction of
the arrows (clockwise).
"LETTER B it will be a T-shaped Allen Key Wretch"
After finding part you must fasten the bolts on the main frame in the same direction as the blue arrows shown. (In the
example image shown to the right turn Clock-Wise.
05
03 Assembly
Step 3
Figure 1
Figure 2
D
3
E
2
D
D
E
D
E
E
Rotate the armrest in the direction of the arrows to the corresponding position of the column (as shown in Figure 1);
Connect the 4-core wire in 2# (electronic panel) and the 4-core wire in the column (as shown in Figure 2); push the
electronic panel horizontally in the direction of the arrow, clamp and fix it on the column with D# (8*16, hex socket head
bolts) and E# (flat washer); and insert 3# (Phone Stand) into 2# (electronic panel) (as shown in Figure 2), and then paste
F# (mobile phone silicone sticker) onto it.
06