Star Power AS01 Manual De Usuario página 7

04 Electric Control
Using The Treadmill
Power On/Off
1. Plug on the treadmill and turn on the switch (red).
(1) Wait for the screen to light up and enter the start interface.
2.Safety lock
(1).Put the safety lock in the designated area on the electronic panel to start the treadmill; attach the safety lock clip
onto your clothes. In case of any emergency, pull off the safety lock to stop the motor of the treadmill immediately. To
continue using the treadmill, just put the safety lock back. In any case, you can stop the treadmill by pulling off the safety
lock.
09
04 Electric Control
3.System Operation
3 6
3 mph 6 mph
01.Time Display：
(1).Display running time as (mm:ss) for the time range (0-99:59) and (hh:mm) for the time range longer than 100 minutes.
(2).Display error code when any malfunction occurs.
02.Distance Display:
(1).Display the distance of movement in miles with the precision to 0.001 miles.
03.Calorie Display：
(1).Display the calories consumed in kcal with the precision to 0.01 kcal.
04.Speed Display：
(1).Display the running speed in mile/hour (mile/h) with the precision to 0.1 mile/h.
(2).Once operation starts, the display switches every 5s.
This is how the electronic panel looks
like.
10