Publicidad
Idiomas disponibles
Idiomas disponibles
05 Connect the mobile app
Note：
System requirements:
ios13 or above ; android 6.0 or above.
Treadmill supports connection to mobile phone via Bluetooth
1.Download PitPat app on your phone and install it Search for "PitPat" in the app store or scan the following QR code to
download and install the app.
2. Configure PitPat app account Open PitPatt app and follow the app instructions to log in or register account information
3. Connect the treadmill
(1) Turn on the Bluetooth function of the mobile phone (the android mobile phone also needs to turn on the positioning function)
(2) Open the PitPat app (if the app prompts for authorization, please grant the app related permissions)
(3) Enter the app home page, click the treadmill icon in the upper left corner of the home page to enter the search interface,
your phone will automatically search for nearby devices. Tap your treadmill (devices starting with PitPat-T are your treadmills) to connect.
After the treadmill makes a beep, the connection is successful, and the Bluetooth icon on the treadmill panel lights up.
Note:
Please make sure your phone is connected to the Internet when connecting the treadmill via Bluetooth
13
3
6
3 mph
6 mph
Note：
If the treadmill is not connected to the mobile app, the Bluetooth icon of the
treadmill is off; if the treadmill is successfully connected to the mobile app, the
Bluetooth icon of the treadmill is on
05 Connect the mobile app
3
6
3 mph
6 mph
Note:
If the treadmill is not connected to the network, the
treadmill WiFi icon will be off; if the treadmill has successfully
connected to the network, the treadmill WiFi icon will be on
4. Treadmill WIFI network configuration
After the treadmill is successfully connected to the mobile app, it will enter the treadmill WIFI configuration interface.
Note:
The treadmill only supports 2.4GHZ WIFI (the app also only displays the 2.4GHZ WIFI signal that the treadmill can search for), please
make sure that your network device can provide 2.4GHZ WIFI signal
(1) Find the network you need to connect to
(2) Enter your WIFI password according to the prompt. After the treadmill successfully connects to the network, the WIFI icon on the treadmill
panel lights up and the app will return to the home page.
Note:
If the WIFI connection fails, after the WIFI returns to normal, please restart the treadmill so that it can reconnect to the Internet
5.Connect the bracelet to the treadmill
Turn on the treadmill, put the screen of the bracelet on the NFC logo of the treadmill, the treadmill make a sound of "bleep" , and the bracelet is
connected with the treadmill.
Once the bracelet is successfully bound, it will recording your running information immediately.
Note:
Only if the treadmill is connected to the mobile app and the
network is successfully configured, the treadmill icon on the PitPat
homepage will display a green dot; otherwise, it will display a red dot
14
Publicidad
