Star Power AS01 Manual De Usuario página 8

04 Electric Control
4.Keys and Functions
01.Start/Pause button:
In the standby state of the treadmill, press the Start button to activate the treadmill, and press the button again to start the
treadmill. In the operating state of the treadmill, press the Start button to pause the treadmill while keeping the existing data
of the exercises, and press the button again to continue exercising.
02.Stop Button:
In the operating state of the treadmill, press the Stop button to stop the treadmill and clear out the data of exercises.
03.Speed Increase and Speed Decrease buttons:
• In the operating state of the treadmill, there are three interactions with the Speed Increase and Speed Decrease
buttons.
(1).Short press the button in 1 second to increase/decrease the speed by 1.0 mile/h each time;
(2).Long press and hold the button over 1 second to increase/decrease the speed by 0.5 mile/h each time;
(3).Quick press the button for multiple times in 0.5 second each to change the speed by 0.5 mile/h each time. While displaying
other indicators, adjusting speed will lead back to the Speed Display.
04.Speed Shortcuts：
Touch the Speed Shortcut key 3 to set the speed to 3.0 mile/h and key 6 to 6.0mile/h, and jump back to the Speed Display.
11
04 Electric Control
05.Safety Lock:
In any state, pulling off the safety lock will stop the operation immediately and display "SAFE" on the electronic panel.
06.Unmanned Shutdown:
In the operating state of the treadmill, if the treadmill detects an unmanned state for more than 10s, it will automatically
stop. In the standby state, press and hold the key 3 and key 6 for more than 5 seconds to cancel the Unmanned Shutdown
function till the buzzer beeps. The treadmill will automatically resume the Unmanned Shutdown function after a power cut.
5.Normal operating function
(1).In the standby state, touch the screen to bring the screen back to the display state. Press the Start button to activate the
treadmill and press the button again to start the treadmill.
(2).In the operating state, press the Speed Increase and Speed Decrease buttons to set for the desired speed.
(3).In the operating state, press the Stop button or Power On/Off or pull off the safety lock to stop the treadmill.
12