Makita DHS782 Manual De Instrucciones página 11

Attach the hook with the screws as illustrated.
1
2
1. Hook 2. Screw
the open position.
the closed position.
1
1. Open position 2. Closed position
Electric brake
This tool is equipped with an electric blade brake. If the
blade after switch lever release, have tool serviced at a
Makita service center.
CAUTION:
substitute for blade guard. NEVER USE TOOL
WITHOUT A FUNCTIONING BLADE GUARD.
SERIOUS PERSONAL INJURY CAN RESULT.
Electronic function
operate because of the following feature(s).
Soft start feature
Soft start because of suppressed starting shock.
ASSEMBLY
CAUTION:
before carrying out any work on the tool.
Hex wrench storage
When not in use, store the hex wrench as shown in the
2
1. Hex wrench
Removing or installing circular saw
blade
CAUTION:
installed with teeth pointing up at the front of the
tool.
CAUTION:
install or remove the circular saw blade.
11 ENGLISH
The blade brake system is not a
Always be sure that the tool is
Be sure the circular saw blade is
Use only the Makita wrench to
1