Makita DHS782 Manual De Instrucciones página 20

Troubleshooting for wireless activation function
ment parts for repairs.
State of abnormality
The wireless activation lamp does
not light/blink.
The vacuum cleaner does not run
along with the switch operation of
the tool.
The vacuum cleaner runs while the
Probable cause (malfunction)
The wireless unit is not installed into the tool.
into the tool.
The terminal of the wireless unit and/or
The wireless activation button on the
tool has not been pushed.
cleaner is not set to "AUTO".
- The wireless unit is not installed into the tool.
into the tool.
The terminal of the wireless unit and/or
cleaner is not set to "AUTO".
Incorrect operation
from each other (out of the transmission
range).
cancellation;
- the switch trigger on the tool is pulled or;
- the power button on the vacuum
cleaner is turned on.
The tool registration procedures for the
waves.
The wireless unit is not installed into the tool.
into the tool.
The terminal of the wireless unit and/or
The wireless activation button on the
tool has not been pushed.
cleaner is not set to "AUTO".
More than 10 tools are registered to the
vacuum cleaner.
The vacuum cleaner erased all tool registrations. Perform the tool registration again.
from each other (out of the transmission
range).
waves.
Other users are using the wireless
activation of the vacuum cleaner with
their tools.
Remedy
wireless unit and clean the slot.
Push the wireless activation button on the tool
"AUTO".
wireless unit and clean the slot.
"AUTO".
the tool registration/cancellation procedures again.
Get the tool and vacuum cleaner closer to each other.
perform the tool registration/cancellation procedures
again.
Perform the tool registration procedures for both the
tool and the vacuum cleaner at the same timing.
appliances such as Wi-Fi devices and microwave
ovens.
wireless unit and clean the slot.
sure that the wireless activation lamp is blinking in blue.
"AUTO".
Perform the tool registration again.
If more than 10 tools are registered to the vacuum
cleaner, the tool registered earliest will be cancelled
Get the tool and vacuum cleaner closer each other. The
appliances such as Wi-Fi devices and microwave
ovens.
tools or cancel the tool registration of the other
tools.
20 ENGLISH
-