Vitamix VM0100 Manual De Instrucciones página 7

WARNINGS!
• When the machine is not in use, unplug the machine from the outlet.
• If you detect a change in the sound of the machine or if a hard or foreign object comes into contact with the blades, do not serve the contents. Inspect your blade assembly for loose, nicked
or missing parts. If parts are loose, missing or nicked, replace with a new blade assembly.
When processing hot liquids always:
• Use caution. Escaping steam or splashes may scald.
• Lock the lid. This will prevent the lid from blowing off when the machine is activated.
• Start on Variable-Speed 1 and quickly increase to 10. Never start on the highest speed when blending hot ingredients.
• Do not let mixtures, liquids or food products dry in the container. Rinse after use. Dry product may lock around the blade and weaken/tear the bearings seal when restarted. Do not place
containers in the freezer.
• Extremely low temperatures combined with hot ingredients and/or the immediate rapid action of the blade may crack the container. Due to the nature of the polycarbonates used in the
Advance containers, microwaving and automatic dishwashing are not recommended.
Blending Tips
1. Place liquids and soft foods in the container first, then solid items and, finally, ice. Although
not necessary for processing, you may want to cut or break food into smaller pieces for more
precise measuring of ingredients. Thawed or partially thawed fruit is recommended. High
speed is recommended for heavy-duty blending.
2. Set the container on the motor base by aligning it over the centring pad anchored to the
base. (The motor must be completely stopped before positioning the container). Containers
are not to be used for hard, dry materials. Avoid running your machine with the container
empty.
3. Always use a lid when blending. If blending hot ingredients, the lid must be securely latched
in place. When processing hot liquids, DO NOT use a non-latching or one-piece lid.
4. Plug the machine into the nearest outlet (if unplugged). Move the On/Off switch to on.
Activate a programme by selecting the desired setting on the dial and then depressing the
Start/Stop switch on the left.
5. If mixture stops circulating, you probably have a trapped air bubble. Drink Machine Two-
Speed, Drink Machine Two-Step and BarBoss models – Either insert the tamper through
the lid while blending. Drink Machine Advance and Bar Boss Advance models – stop the
motor, remove the container from the base and stir or scrape the mixture from the sides of
the container into the centre using a rubber spatula to press any air bubbles away from the
blades. Replace the lid and continue blending.
6. Due to the blending speed of the machine, processing times are greatly reduced over other
manufacturers' machines. Until you become accustomed to the speed, watch your mixture
carefully to avoid over-blending.
7. After the blender has been stopped, wait until the blade is completely still before removing
the lid or container from the motor base.
8. To use the pulse switch to refresh drinks: Make sure the power is on. With the container on
the motor base, depress the pulse switch. Release the switch to stop the motor.
9. Unplug the blender when not in use.
The BarBoss® Advance® and Drink Machine Advance® are pre-programmed with settings optimised for the Advance® container. The programmes can be customised by using a programming
chip or programmer software kit available from Vitamix®. Call your distributor or Customer Services for more information.
Although your machine comes from the factory pre-set with the programmes, follow these instructions when using a custom programming chip.
Programming with a Custom Chip
1. Turn on the power to the machine using the On/Off switch located on the front of the machine below the control panel.
2. Remove the container and lift the front of the machine so that you can see the bottom programming port. Facing the front of the machine, insert the
custom programming chip with the silver contact bars up and the words, 'THIS SIDE FACING TO THE FRONT OF THE MACHINE' towards you into the
port located below the label area.
3. Within 5 seconds, the six Pre-Set Programmes will be re-programmed.
4. Remove the programming chip, return it to the original package and store in a safe, easily accessible spot.
back on its feet and replace the container.
Programming Port Resetting Pre-Set Programmes to original factory settings
1. Turn off the power to the machine using the On/Off switch located on the front of the machine below the control panel.
2. Hold down the pulse button while turning the power back on using the On/Off switch.
g i
e n e R a l n S t R u c t i o n S
Bar Boss and Timer Blender Instructions
1. Follow STEPS 1 to 3 above.
2. Move the On/Off switch to ON. Activate the timer by selecting the desired timer setting on the
dial and then depressing the START/STOP TIMER switch on the left.
Note: The START/STOP TIMER switch on your machine is lit when the power is ON. Avoid movable
machine parts.
3. Follow STEPS 5 to 10 above to complete the blend.
BarBoss® Advance® & Drink Machine Advance® Pre-Set Programmes
The following are settings of the six Pre-Set Programmes for the BarBoss Advance and Drink Machine
Advance machines. These programmes, numbered from 1 to 6, are blending cycles designed for the
most commonly made drinks. Selecting one of the six Pre-Set Programmes will run the machine for
a full cycle. The machine will stop automatically when the cycle is complete. A cycle varies in speed
and length. Your machine's Pre-Set options may differ due to programme revisions or if your machine
was programmed specifically for your business. Due to the differences in recipes, your results may
also vary.
Setting 1: (:15)
Setting 2: (:18)
Setting 3: (:21)
Setting 4: (:24)
Setting 5: (:27)
Setting 6: (:30)
p
R o g R a m m i n g
Blends thin drinks with just juice and ice.
Blends light coffee drinks.
Creates a speciality drink with a thick viscosity.
Creates ice cream and regular coffee drinks that need a slightly longer blend.
Blends a regular smoothie.
Blends thick frozen fruits and hard ingredients for a thick but consistent
smoothie.
5. Place the machine
BOTTOM OF THE
MACHINE
7