ResMed Pixi PEDIATRIC MASK Guia Del Usuario página 17

Headgear Reassembly
Pixi Hint!
• You don't need to disassemble your Pixi headgear to wash it.
• The VELCRO
coded for ease of assembly.
Headgear Reassembly steps
1. Lay the headgear and plastic buckles out on a flat surface as shown,
ensuring the lower headgear arms are facing up.
2. Thread each light blue strap up and over the light blue buckle, then
secure into place.
3. Thread each dark blue strap up and over the dark blue buckle, then
secure into place.
4. Thread the VELCRO
the lower headgear arm, then secure into place. There is no need to
attach the quick release clip to the headgear now.
Ensure that any VELCRO
mask, otherwise your headgear may be incorrrectly assembled. The headgear
is now ready for fitting. Refer to the Set up illustrations in this guide.
brand hook and loop fasteners have been color
®
brand end of the lower headgear strap through
®
brand plastic parts are on the outer side of the
®
1
3
12
2