HP Designjet Z5200 Serie Manual De Instrucciones página 5

Ensure both ends of the roll are as close to the spindle stops as possible.
6. Put the blue paper stop onto the open end of the spindle, and push it towards the end of the roll.
7. Ensure the blue paper stop is pushed in as far as it goes, until both ends are against the stops.
If you are a regular user of different paper types, you can change rolls more quickly if you preload rolls of different
paper types on different spindles. Extra spindles are available for purchase.
Load a roll into the printer
To start this procedure, you must have a roll loaded on the spindle.
1. Standing behind the printer, rest the spindle's black end on the left side roll holder. Do not put the end
completely into the roll holder.
2. Rest the blue end of the spindle on the right side roll holder.
Introductory Information
4