dirna Bergstrom bycool green line COMPACT 1.4 M.B. ACTROS Instrucciones De Montaje página 23

COMPACT
15
Place the supplied console on the original
console frame and align the unit.
BE SURE THERE IS A GAP BETWEEN THE
CONSOLE FRAME AND THE FRONT.
Fasten supports tightening nuts until outside
16
EPDM joint of equipment is compressed,
between 3 and 6 mm;
Important: To avoid water from filtering inside
cabin, check EPDM joint tightening with unit
base, as indicated on diagram.
16
3-6mm.
Cabin roof
Fasten selflocked nut until
EPDM gasket is compressed
between 3 and 6 mm.
Tighten (4) M8 nuts to support and (4) to Unit
17
base.
EPDM gasket
10 mm*
(*) (approx. after tightening)
Air conditioning for vehicles
15
Base
EPDM Joint
23
Check compression
thickness using a
tape measure in the
four corners.
EPDM gasket
EN
16
17