Phonocar VM 041 Manual De Instrucciones página 33

Precautions
1. Never disassemble or adjust the unit without any professional guide. For details, please consult any
professional car shop / dealer for inquiry.
2. If the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to
wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result
in scratching or decoloration to the applicant.
3. If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this manual. If no
relevant information is found,please press the [RESET] key on the front panel to resume factory default.
4. If you have parked the car in hot or cold weather for a long time, please wait until the temperature in the
car becomes normal before operating the unit.
5. Using in-car heater in low temperature environment may result in beads coagulate inside the unit, DO
NOT use the unit in this situation, eject the disc and wipe off the bead on the disc. If the unit still doesn't
work after a few hours, please contact with after-sales service center.
6. No fierce impact to the LCD monitor when it is in open position for preventing the damage to any
mechanisms inside.
7. To prevent the damage to the screen, avoid touching it with sharp objects.
8. The monitor employs auto motorizing mechanism, please don't push, pull, or swivel the monitor
manually to prevent damage to the core mechanism.
9. To provide a clear demonstration and an alternative for easy understanding to the operation of this unit,
graphic illustrations areused. However, these illustrations are some different from the actual images dis
played on the screen.
10. During operating the unit
11. Operate the unit correctly according to this manual to prevent unnecessary problem.
The guarantee won't be valid if the problem is caused by inappropriate operation.
will display if the current operation is not available or illegal.
33
GB