Phonocar VM 041 Manual De Instrucciones página 36

Before using
Auxiliary LCD
1. Disc indicator. Light up when one disc is inside; Light off when no disc is inside.
2. Repeat mode indicator. Light up when repeat mode is on; Light off when repeat mode is off.
3. Main display area. Display characters, playback time, tuning frequency, clock and other text information.
4. Radio status indicators. Stereo indicator lights up when the radio broadcast is a stereo one; Local
indicator lights up when the local seeking function is activated.
5. RDS function indicators AF: Alternative Frequency - PTY: Program TYpe - TA: Traffic Announcement
TP: Traffic Program
Note:
• Most information can be displayed on this LCD only when the TFT monitor is closed.
• Only English font support on this LCD.
Notes of remote control using
1. Aim the remote controller at the remote sensor on the unit.
2. Remove the battery from the remote control or insert a battery.
3. DO NOT store the remote control under direct sunlight or in high temperature environment, or it may not
function properly.
4. The battery can work for 6 months under normal condition. If the remote control can't work, please
change the battery.
5. Use "button shaped" lithium battery "CR2025" (3V) only.
6. DO NOT recharge, disassemble, heat or expose the battery in fire.
7. Insert the battery in proper direction according to the (+) and (-) poles.
8. Store the battery in a place where children cannot reach to avoid the risk of accident.
Unistall battery
Slide out the battery compartment tray at the
bottom on the back of the remote control.
PULL OUT
Use button-shaped lithium battery "CR2025" (3V)"
only. Insert the battery to the battery tray with
proper direction according to the (+) and (-) poles.
36
Instal battery
PUSH IN