Phonocar VM 041 Manual De Instrucciones página 58

Installation and uninstall
Method B
1. Insert this unit directly to the opening of the dashboard. ()
2. Place M4×3, M5×5 cylindrical screw or M5×5 cone shaped screw through the holes of the mounting
frame located inside the opening to holes of the unit and fasten the screws to left & right.
Trim Ring installation
Attach the trim ring around the front panel with two indentions on one side facing upwards
Uninstall
Disassemble trim ring
1. Push the trim ring upward and pull out the upper part.
2. Push the trim ring downward and pull out the lower part.
Disassemble the unit
1. Unscrew the 4 pieces M2×2 screws.
2. Use a screwdriver to bend straight the bended mounting tab and tip out the unit from the mounting bracket.
3. Pull out the unit from the mounting bracket with both hands .
58