Radio Mode - Phonocar VM 041 Manual De Instrucciones

Radio mode

GB
Select radio as playing source
Open the SOURCE MENU and then touch RADIO.
Select one radio band
Press the [BAND] key on the display panel or remote control or touch the [BAND] icon on the user interface
to select one radio band among FM1, FM2, FM3, AM1 and AM2.
Auto tuning
Press the ( / ) keyonthedisplaypanel orremotecontrolor oucht
the ( / ) icon on the user interface to seek a higher / lower station. To stop searching, repeat the opera-
tion above or press other keys having radio functions.
Note: • When a station is received, searching stops and the station is played. If the unit receives a stereo
broadcasting, the indicator light of stereo 'ST' on the TFT or LCD display will be lighted.
Manual tuning
During manual tuning, the frequency will be changed in steps. Press the ( / ) key on remote control or
touch the ( / ) icon on the user interface to tune in a higher / lower station.
Touch the numeric keypad icon( ) and then touch the numeric buttons to input the radio station frequency
numbers.
Auto save
Only stations with sufficient signal strength will be detected and stored in the memory. When the monitor is
closed, press and hold the [AS PS] key on the / display panel. When the monitor is opened, touch the [AS]
icon on the user interface. To stop auto save, press other keys having radio functions.
Notes:
• After auto save, the previous saved stations will be overwritten.
• The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and Each band can store 6 stations; hence the
unit can store 30 stations in all.
Manual save
When one expected radio station has been detected......
1. Press the MEM icon on the user interface and the preset menu will be opened.
2. Press one preset button among P1~P6.
3. If you want to abort, press the [Exit] button.
Preview scan
Preview scan searching is such a process that the searching pauses when a station is received and then
played for 5~10 seconds. After being played, the unit continues the process until the whole band is detec-
ted. When the monitor is closed, press the [AS/PS] key on the display panel. When the monitor is opened,
touch the [PS] icon on the user interface. To stop the process, press other keys having radio functions.
Recall the stored stations
Press one numeric key among 1 to 6 on the remote control or touch an onscreen station button to select the
corresponding stored station.
Local seeking
When LOCAL seeking is on, only those radio stations with strong radio
signal could be received.
To open or close LOCAL function, press and hold the volume knob on the
front panel.
Notes: • When the local radio station searching is on, the indicator light 'LOC' lights up; whereas the light
goes off. • The number of radio stations that can be received will decrease after the local seeking mode is
on.
39