hillvert HT-LS-5000 Manual De Instrucciones página 65

D) Connect log shelf 1 and log shelf 2 with two M6 × 12 screws and locknuts.
3.3.3.
A) Join the two rear protection plates with two M6 × 20 screws, U washers and
nuts.
B) Attach the front guard plate, the left guard plate and the rear guard plates to
the log shelf and bottom plate. Secure the front and back plates with M6 × 20
screws, U washers and nuts. Then secure the left plate with an M6 × 20 screw
and nut.
Installation of the safety net -
HT-LS-5000