Diono Radian 3RXT Manual De Instrucciones página 40

INSTALL USING 5-POINT HARNESS WITH
LAP BELT:
1. Place car seat rear-facing in
back seat of the vehicle with
detachable rear-facing base
installed (page 32). The entire
seat bottom should sit flat on the
vehicle seat.
2. Slide the vehicle seat belt
through the rear-facing belt
path and out the other side.
Buckle it. The vehicle seat belt
should lie flat and not be twisted.
3. Tighten the vehicle seat belt.
Press down firmly in the center of
the car seat. To tighten, pull on the
loose end of the vehicle lap belt.
40
5–50 lb (2.3–22.7 kg)
Radian® 3RXT
1
2
3