Diono Radian 3RXT Manual De Instrucciones página 47

3. Unhook and remove top
tether strap from storage
location on back of seat.
4. Feed LATCH/UAS connectors
into forward-facing belt path.
The LATCH/UAS connectors
are easier to feed through by
routing behind cover.
5. Place car seat forward-
facing in back seat of the
vehicle. Center the car seat
between the vehicle LATCH/
UAS anchors. The entire seat
bottom should sit flat on the
vehicle seat.
6. Loosely attach tether strap.
Do not tighten. Consult
vehicle's owner manual for
specific location.
Continued on the next page
diono.com
3
4
5
6
47