Diono Radian 3RXT Manual De Instrucciones página 57

BOOSTER MODE INSTALLATIONS:
WARNING: Make sure the vehicle seat belt can properly
retract before each use.
ALWAYS secure the child restraint using the vehicle
belt or LATCH connectors even when it is unoccupied.
It could injure other occupants in a sudden stop or
collision.
NOTE: If 5-Point harness is installed, please review the
harness removal section. The 5-Point harness MUST be
removed to use this seat in booster mode.
1. Place child in car seat with their back flat against the
back of the seat.
2. Feed the diagonal portion of the vehicle seat belt
through belt guide and over booster seat.
3. Buckle the vehicle lap/shoulder belt. Be sure the
shoulder belt lies across your child's shoulders,
between the neck and edge of the shoulder. Be sure
the lap portion of the vehicle seat belt goes under the
side nubs and the belt lies low across your child's hips.
diono.com
57