Electric connection
Unscrew and remove the cover of the electrical panel of the condensing unit.
Connect each cable to its corresponding terminal according to its number.
Ground connection: loosen the ground screw on the electrical panel, then screw the ground cable.
Connect each cable in place using a spade terminal.
Replace the electrical panel cover in place.
Note: Do not invert the polarity, it could cause the appliance to malfunction. Check that the connections are firm and not making false
contact. If there is a connector, connect directly.
Wiring diagram
Make sure that the color of the outdoor unit's wires (evaporator unit) and the terminal number match those of the indoor unit
(condenser unit).
CAREGUIDE WHEN CONNECTING
ELECTRIC TERMINALS TO THE UNIT
1.
When connecting the electrical terminals with a twisted cable,
make sure to use a spade terminal to connect the twisted
terminals to the electrical connections terminal of the
appliance.
Install the spade terminals in the connection cables and secure
them in its place.
Cover
Terminal
2. When connecting the solid wire cable, make sure to connect it
with a hook shape and secure with the screw.
black
Brown
Electric connection
Blue
cable
Yellow/Green
Twisted wire
terminals
Solid wire
Yellow/Green
black
Brown
Blue
Brown
Blue
Yellow/Green
Electric supply
2