BRAND Titrette Instrucciones De Manejo página 61

Bottle-top
burette Titrette®
10' 10 0.10
5 0.20
1 1.00
25' 25 0.07
12.5 0.14
2.5 0.70
50' 50 0.06
25 0.12
5 0.60
* A = Accuracy, CV = Coefficient of Variation ** EL = Error Limit
On 10 ml and 25 ml instruments, the titration volume is shown in 1 µl increments; on 50 ml instru-
ments it is shown in 2 µl increments. From a titration volume of 20 ml, this changes automatically to
10 µl increments.
The drop size for the 10 ml instrument is approx. 20 µl, and approx. 30 µl for the 25 ml and 50 ml in-
struments.
The maximum error for a single measurement can be approximated from the sum of error limits EL = A
+ 2 × CV. For the 25 ml instrument this amounts to a maximum of ± 30 µl, and ± 50 µl for the 50 ml in-
strument.
As a result, Class A glass burettes are within the error limits according to DIN EN ISO 385.
10 Checking the Volume (Calibration)
Depending on use, we recommend that gravimetric testing of the instrument be carried out every 3-12
months. For calibration, set the 10 ml instrument to 3 decimal places (page 21). This time frame
should be adjusted to correspond with individual requirements. The complete testing procedure
(SOP) can be downloaded at www.brand.de. You can also carry out a functional test at more frequent
intervals, e.g., by titrating against a standard solution. For GLP- and ISO-compliant evaluations and
documentation, we recommend the EASYCAL™ calibration software from BRAND. A demo version can
be downloaded from www.brand.de.
Gravimetric volume testing according to DIN EN ISO 8655- 6 (for measurement conditions, see Error
limits, p. 60) is performed as follows:
1. Prepare the instrument
Clean the instrument (Cleaning), fill it with distilled Water and then prime it carefully.
2. Check the volume
a.
Dispense 5 drops in a separate vessel and wipe off the titration tube tip.
b.
Press the CLEAR button to set the display value to zero.
997469
Bottle-top
burettes in accordance
with
DIN EN ISO 8655- 3
10 0.05 5 0.3
10 0.10 5 0.6
10 0.50 5 3
18 0.025 6 0.2
18 0.05 6 0.4
18 0.25 6 2
30 0.02 10 0.2
30 0.04 10 0.4
30 0.20 10 2
NOTICE
10 Checking the Volume (Calibration)
Glass burettes
Class A in accor-
dance with
DIN EN ISO 385
30 0.1 10 20
30 0.2 10 20
30 1 10 20
50 0.1 25 30
50 0.2 25 30
50 1 25 30
100 0.1 50 50
100 0.2 50 50
100 1 50 50
61
Operating manual