cecotec CONGA 2290 ULTRA HOME Manual De Instrucciones página 58

ENGLISH
9.
Scheduling
10. Edge cleaning
11. Power levels
Conga Home 2000
Fig. 16
Front part
1. Cover
2. Dust tank
3. Charge/empty function light indicator
4. IR lenses
5.
Charger plug in
6.
Suction inlet
Inside
7. Cover sealing ring
8. Fan filter bracket
Back
9.
Air outlet
Base
10. Transparent dirt tube cover
2. BEFORE USE
- Take the product out of the box.
-
Remove all packing material and keep the original box.
- Make sure all parts and components are included and in good conditions. If any sign of
visible damage is observed, contact immediately with the official Technical Support
Service of Cecotec.
- Place the Conga Home 2000 base on a flat surface, 6 cm from the wall. Fig. 17
- Maintain a separation of at least 1.2 m in front and 0.5 m on both sides of the unit. Fig. 18
-
Connect the Conga Home 2000 base to a power socket. Wind and store the remaining cord
in the lower part to prevent accidents. Fig. 19
Note
Remove all objects around the robot such as clothing, papers, cables, curtains or other fragile
objects. Fig. 20
- If the area to be cleaned has a balcony or stairs, a physical barrier must be placed in order
to prevent product damage and ensure safe operation. Fig. 21
- Direct exposure to sunlight or great light contrasts may affect to the correct operating of
the sensors. When exposed, the robot will stop. Replace it to start working again.
58