Descargar Imprimir esta página

cecotec CONGA 2290 ULTRA HOME Manual De Instrucciones página 62

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
ENGLISH
Note
Make sure the remote control is close to the robot when setting the clock or scheduling
cleaning cycles.
Setting the remote control's time
-
Press the clock button on the remote control. Digits will start blinking.
-
Select the current day of the week by pressing the upwards and downwards buttons. Fig.
33
-
Use the left and right buttons to set minutes and hour. Use upwards and downwards
buttons to change the digit while it blinks. Fig. 34
-
Finally, press the power or the clock button. The robot will beep when the time settings
have been confirmed. Fig. 35
Cleaning scheduling
-
To make the cleaning easier, the robot includes a schedule function to set daily schedules
through the remote control or the App. In accordance to the configuration, the robot will
automatically start cleaning the selected days at the desired time.
-
The time options on the remote control are: 12:00 a. m.–11:59 p.m. and 12:00 p.m.–11:59 p.m.
-
Before setting the time and the robot configuration, make sure the robot's power switch is
on and that the power button on the robot is lit up.
Configuration with the remote control
-
Press the schedule button on the remote control. Digits will start blinking. Fig. 36
-
Use the direction buttons to select the day. Once selected, use right and left buttons to
select minutes and hours. Use direction buttons when digits are blinking to set the desired
minutes and hours. Press the power button to save settings. Enter the desired days and
follow the same steps to schedule them. Fig. 37
-
Finally, press the schedule button to exit scheduling mode. The robot will beep once
indicating the scheduled cleaning settings have been confirmed.
-
The user may schedule as many days per week as desired. The home screen will display
when the robot is scheduled.
-
Cancelling scheduled cleaning
-
Press the schedule button on the remote control, select the day you wish to delete
and change the set time to 00:00 am., this is the time to be set to cancel the cleaning
programme. Fig. 38
4. CLEANING AND MAINTENANCE
Conga 2290 Ultra
-
In order to lengthen your robot's shelf life and to allow your robot to operate at peak
62

Publicidad

loading