cecotec CONGA 2290 ULTRA HOME Manual De Instrucciones página 60

Idiomas disponibles

ENGLISH

the Conga Home 2000 base.

Turn off

Hold down the power button to turn the robot off. Fig. 26

Warning

The robot vacuum cleaner has a power switch located on its main body. If the robot is not going

to be used for long periods of time, it is suggested to switch it off. If the robot is switched off, it

will restore factory default settings as a safety measure. To use the time setting function, the

switch must be in On position. Otherwise, you will have to reset it using the remote control or

the App.

Cleaning modes

This robot includes different modes and different functions that can be activated from the

remote control or the App.

Automatic mode

Press the power button for the robot to start Auto cleaning mode.

The robot will clean the whole surface, edges, around objects like tables, chairs etc. Once it

starts running out of battery, it will return to the charging base. Fig. 27

Intense scrubbing mode

Attach the mop cloth to the water tank and fill the tank with water.

Take the dust tank out.

Install the water tank in the robot and turn it on. Fig. 28

Use the remote control to select the desired scrubbing power level: High, Medium or Low.

Once the scrubbing mode is selected from the remote control or the App, the device will

perform the function "All in One" to vacuum, mop and scrub at the same time thanks to its

Wet & Dry tank.

Note

If you want to sweep the floor, skip the water-filling step.

To ensure perfect scrubbing from the start, it is suggested to dampen the mop cloth evenly

with water before use.

Spiral mode

The robot will carry out an intense cleaning of a specific area when this mode is activated.

The robot will start cleaning at a specific point and will move outwards performing spiral

movements (1 metre). Then, it will return to the starting point in spiral movements again.

Before operating the robot with the Spiral cleaning mode, place it on the spot to be cleaned.

Press the Spiral cleaning button on the remote control or on the App. Fig. 29