Cleaning; Cautions With Stainless Steel - Skymsen DAL-06 Manual De Instrucciones

Peladora de ajo
Ocultar thumbs Ver también para DAL-06:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.2 Cleaning

To achieve a good machine cleaning , follow these instructions:
1 . Start the machine empty , and let it work during some minutes, adding abundant
water .
2. Switch OFF the machine and unplug it . Wait for the Disc No.06 (Pict.01) to stop
completely.
3. Clean the outside of the housing with a wet cloth.
4. Remove the Lid No.04 (Pict.01) and lift the Disc #. 06 (Pict.01) .
5 Clean the Disc using a nylon brush and abundant water.
6 . Replace the Disc inside the machine following the inverse procedure . Take care
to have the Disc fitting on the central shaft pin .
Take good care and use your machine correctly with safety , and you will have

3.2.1 Cautions with Stainless Steel:

The Stainless Steel may present rust signs, which ARE ALWAYS CAUSED
BY EXTERNAL AGENTS, especially when the cleaning or sanitization is not
constant and appropriate.
The Stainless Steel resistance towards corrosion is mainly due to the
presence of chrome, which in contact with oxygen allows the formation of a very
thin protective coat. This protective coat is formed through the whole surface of the
steel, blocking the action of external corrosive agents.
When the protective coat is broken, the corrosion process begins,
being possible to avoid it by means of constant and adequate cleaning.
Cleaning must always be done immediately after using the
equipment. For such end, use water, neutral soap or detergent, and clean the
equipment with a soft cloth or a nylon sponge. Then rinse it with plain running
water, and dry immediately with a soft cloth, this way avoiding humidity on
surfaces and especially on gaps.
The rinsing and drying processes are extremely important to prevent
stains and corrosion from arising.
Acid solutions, salty solutions, disinfectants and some sterilizing
solutions (
hypochlorite
s, tetravalent ammonia salts, iodine compounds,
nitric acid and others), must be AVOIDED, once it cannot remain for long
in contact with the stainless steel:
IMPORTANT
good rewards .
IMPORTANT
05

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dal-06-5

Tabla de contenido