CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove battery from the tool. For safe and
proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your impact driver; never use detergent or alcohol.
TROUBLESHOOTING
WARNING:
• Before performing troubleshooting procedures, release the trigger switch, press the trigger-
lock button to the middle position marked
from the tool.
PROBLEM
Tool does not work
Blade binds, jams, or burns the wood.
The motor is overheating.
WARRANTY
For 5 years from the date of purchase, the power tool is warranted for the original purchaser
to be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
to lock the switch OFF, and remove battery
POSSIBLE CAUSE
Battery pack charge is
depleted.
1. Improper operation.
2. Dull blade.
3. Improper blade.
Ventilation slots are
obstructed.
14
CORRECTIVE ACTION
Charge the battery pack.
1. See "OPERATING
INSTRUCTIONS"
section.
2. Replace or sharpen
blade.
3. Replace blade.
Clean and clear the
ventilation slots. Do not
cover the ventilation
slots with your hand
during operation.
Lowe's Home Centers LLC.
Mooresville, NC 28117
Printed in China