Lomography LOMO'INSTANT AUTOMAT Manual De Instrucciones página 18

Check whether there is anything blocking the Light Sensor
a
Sensor 11, then check whether the camera is correctly set to Auto Shooting
Mode. The ambient exposure value and auto flash output may also be
affected by strong backlight or a highly reflective background such as snow.
If your subject is too dark, set the Exposure Compensation Button
and shoot again. If your subject is too bright, set the Exposure Compensation
Button to "–1".
14
CARE AND WARRANTY
Your Lomo'Instant Automat has a 2–year warranty against any manufacturer
defects. In the event of a defect, the Lomographic Society will repair or replace
the item at our discretion. For the warranty service, please contact your closest
Lomographic Office.
or Flash Light
22
to "+1"
14
ENGLISH / 18