TRINNITY KLMO26 Manual De Instalacion Y Uso página 30

Transport of equipment containing flammable refrigerant.
see transport regulations
Marking of devices with signs
see regional rules
Disposal of equipment with combustible refrigerants
see regional rules
Storage of equipment/equipment
The equipment must be stored in accordance with the manufacturer's instructions.
Storage of packaged (unsold) equipment
The protection of the bearing packaging should be such that mechanical damage does not cause leakage
of the refrigerant filling. The maximum number of equipment that may be stored together is governed by
national/regional regulations.
Information on maintenance
See chapter "Care"
At the refrigeration circuit, only authorized specialists with appropriate qualifications are required to
Perform!
8. Checking electrical equipment
Repairs and maintenance of electrical components must be carried out in the first safety checks and
inspection procedures for components. If there is an error that may affect security, you may not
electrical supply to the circuit until it is fixed.
Initial safety checks include: The unloading of the capacitors must be carried out in a safe manner,
to prevent spark formation. No current-carrying electrical components and cables must be
exposed during loading, recovery or cleaning of the system. Ensure
continuous grounding of the system/circuit.
page 7