Publicidad
Idiomas disponibles
Idiomas disponibles
This submersible pump does not require any maintenance,
however, if the pump is installed permanently, it should be
checked regularly to ensure that it is kept in perfect working
order and has a long lifespan.
Every 3 months:
▪ Turn on the multistage centrifugal pump;
▪ Clean the suction area of the pump, remove the mud
accumulated at the bottom and clean the walls if
necessary.
When using the pump as a portable pump, clean it with
running water after each use.
Before carrying out any cleaning work, unplug the
power cord.
For your own safety, if either the impeller or electrical parts
of the pump (power cord or plug and switch) need to be
repaired, these operations should only be performed by
qualified technicians.
Once the pump and its accessories have been cleaned,
store the pump in a stable, safe position, in a dry and mild
place. Avoid storing it in temperatures that are either too
high or too low. The ideal temperature at which to store the
pump is between 5 and 30°C.
Always remove the water accumulated in the body of the
multistage centrifugal pump. To do this, use the water drain
plug (1).
Protect the pump from direct sunlight. If possible, keep the
water pump in a dark place.
Do not store the pump in plastic bags, as they could create
moisture. Store your power tool in its original packaging.
Keep it away from children.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste, power tools
must be collected separately and delivered to the collection
sites provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Website:
www.centrallobao.pt
Publicidad
