Publicidad
Idiomas disponibles
Idiomas disponibles
9.1. DAB mode
When the device is switched on, press the SOURCE button on the remote con-
trol or the
button on the device
Use or to select the required source until DAB/DAB+ is highlighted on
the display.
Press to confirm.
9.1.1. Retrieving stations from the station list
Press the TUNE or TUNE+ buttons once or several times to select the required
DAB station from the station list.
Press to play the station.
Stations in the station list that cannot currently be played are highlighted with a ?
symbol.
9.1.2. Storing stations automatically
A station list including all DAB stations that can be received was already created the
first time the device was switched on. The stations are stored in alphabetical order.
You can, however, also manually perform a new search:
Press the AUTO button to start the search.
The search is performed and all stations found are stored again. While this is hap-
pening, the search progress and the number of stations stored is displayed.
The previously stored station slots are overwritten.
9.1.3. Searching for stations manually
Press and hold the MENU button until the menu is shown on the display.
Press the or buttons to select MANUAL TUNE and press to confirm.
The first reception block 5A with the corresponding frequency is shown on the
display.
Use the or buttons to select the required reception block. Familiarise your-
self with the blocks that can be received in your transmission area.
Press the button to open the channel. The field strength of the selected
block is shown on the display.
DE
EN
FR
ES
IT
NL
57
Publicidad
