Publicidad
Idiomas disponibles
Idiomas disponibles
11.1. Setting the alarm time
If the device is switched on, press the
standby mode. Only the date with both alarm times underneath are shown on
the small display.
Press and hold the TIMER button for a few seconds. ALARM 1 SETUP is shown
on the display.
Press the TIMER again to select the required ALARM 1 or ALARM 2 and press
to confirm.
Use the or buttons to select the hour for the alarm time and press the
button to confirm.
Use the or buttons to select the minutes for the alarm time and press the
button to confirm.
Use the or buttons to select the alarm duration (15, 30, 45, 60, 90 minutes)
and press the button to confirm.
Use the or buttons to select how you would prefer to be woken: DAB ra-
dio (DAB), FM radio (FM), CD (CD), USB stick (USB) and press the button to
confirm.
If you have selected DAB or FM, the radio station selection now appears. Select
LAST LISTENED to be woken by the last radio station that was listened to or
select one of the stored stations (1–30; only when stations have already been
stored). Press the button to confirm.
Use the or buttons to set how regularly the alarm is to sound (daily, once,
weekends, work days) and press the button to confirm.
Use the or buttons to select the alarm volume (min. level 4) and press the
button to confirm.
Then use the or buttons to switch the alarm on/off and press the but-
ton to confirm.
If at least one alarm is switched on, an alarm symbol with the number of alarms is
shown on the display. In standby mode, the alarm status with the set alarm time is
displayed.
When in DAB alarm mode, if the set station is not available at the wake-
up time, no tone is played.
60
button until the device switches to
Publicidad
