Taurus HUBBLE ZOOM Manual De Instrucciones página 11

- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to us.
- Clean the blades and the comb guide with the
cleaning brush. Remove the hairs from the
blades and from inside the appliance with the
brush. It is important to clean off remaining
hairs after each use.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
CAUTION: the appliance must be disconnec-
ted from the supply mains when removing the
batteries.
- To remove the batteries, once the life of the
appliance, proceed as follows:
- Open the top shell of the apparatus, remo-
ving previously with the help of a screwdri-
ver fixing screws.
- Identify the battery wires and cut their
(Red and Black). To avoid risks of a short
circuit with a possible residual battery
load, first cut the Red wire and protect it
by using insulating tape, then proceed to
cut the Black wire proceeding in the same
way.
- Safely remove the battery from its hou-
sing.