Descargar Imprimir esta página

SMA SUNNY TRIPOWER CORE1-US Instrucciones De Instalación página 50

Ocultar thumbs Ver también para SUNNY TRIPOWER CORE1-US:

Publicidad

Idiomas disponibles

Idiomas disponibles

7 Commissioning
☐ The installer's SMA Grid Guard code must be available to change network-relevant settings
after the first 10 hours of feed-in operation, or after completing the installation assistant. You
can request the SMA Grid Guard code via the Online Service Center.
SSID, IP address and WLAN password
• SSID in WLAN: SMA[serial number] (e.g. SMA0123456789)
• Device-specific WLAN password: see WPA2-PSK on the type label of the product or the
rear side of the manual included in delivery
• Standard access address for a direct connection via WLAN outside of a local network:
https://smalogin.net or 192.168.12.3
Importing and exporting files with smart devices having an iOS operating
system is not possible
For technical reasons, importing and exporting files (e.g., importing an inverter configuration,
saving the current inverter configuration or exporting events and parameters) is not possible
with smart devices having an iOS operating system.
• Use a smart device that does not have an iOS operating system for importing and
exporting files.
Connection with WPS
Requirement:
☐ The smart device must have a WPS function.
Procedure:
1. Enable the WPS function on the inverter. To do this, tap twice in succession on the enclosure
lid of the DC-Connection Unit next to the LEDs.
☑ The blue LED flashes quickly for approx. two minutes. The WPS function is active during
this time.
2. Enable the WPS function on your smart device.
3. Open the web browser of your smart end device and enter https://smalogin.net in the
address bar.
Connection with Wi-Fi network search
1. Search for Wi-Fi networks with your smart device.
2. Select the SSID of the product SMA[serial number] in the list with the detected Wi-Fi
networks.
3. Open the web browser of your smart end device and enter https://smalogin.net in the
address bar.
☑ The login page of the user interface is displayed.
4. If the login page of the user interface does not open, enter the IP address 192.168.12.3 or, if
your smart end device supports mDNS services, SMA[serial number].local or https://
SMA[serial number] in the address bar of the web browser.
50
STP33-62-US-41-IA-xx-14
SMA Solar Technology AG
Installation Manual

Publicidad

loading

Este manual también es adecuado para:

Stp 33-us-41Stp 50-us-41Stp 62-us-41Tripower core1-us stp 33-us-41Tripower core1-us stp 50-us-41Tripower core1-us stp 62-us-41