Little Giant SELECT Serie Manual Del Propietário página 3

INTRODUCTION
This submersible multi-purpose pump is designed for water transfer
applications and household water removal. This pump is for use
with WATER ONLY.
This pump is:
• NOT FOR USE FOR TRANSFERRING POTABLE WATER.
• NOT FOR USE IN EFFLUENT OR SEWAGE APPLICATIONS!
• NOT TO BE INSTALLED IN LOCATIONS CLASSIFIED AS HAZARDOUS IN
ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE (ANSI/NFPA)!
• NOT FOR USE AS A POND PUMP!
• NOT FOR USE WITH SPRINKLER SYSTEMS as this pump does not
deliver enough pressure for sprinkler applications.
This instruction sheet provides you with the information required to
safely own and operate your product. Retain these instructions for
future reference. The product you have purchased is of the highest
quality workmanship and material and has been engineered to give
you long and reliable service. This product has been carefully tested,
inspected, and packaged to ensure safe delivery and operation. Please
examine your item(s) carefully to ensure that no damage occurred
during shipment. If damage has occurred, please contact the place of
purchase. They will assist you in replacement or repair, if required.
SAFETY GUIDELINES
W A R N I N G
s
DANGER
!
Do not touch the motor, hoses or
water until unit is unplugged or shut off at the breaker. If the circuit
breaker is not accessible, call the electric company to shut off service
to the house, or call your local fire department for instructions.
Failure to follow this warning can result in fatal electrical shock.
s
WARNING
!
This product is supplied with a grounding conductor and grounding-
type attachment plug. To reduce risk of electric shock, be certain
that it is connected only to a properly grounded grounding-type
receptacle. The third prong is to ground the pump to help to
prevent possible electric shock hazard. Do not remove the
third prong from the plug.
As a safety measure, each electrical outlet should be checked with an
Underwriters Laboratory Listed circuit analyzer. This will indicate if the
power, neutral and ground wires are properly connected. If they are
not, call a qualified licensed electrician.
All manuals and user guides at all-guides.com
W A R N I N G
RISK OF ELECTRIC SHOCK
s
WARNING
!
HAZARD. DO NOT USE AN EXTENSION CORD. The power service outlet
must be within reach of the pump's power cord plug. A fire hazard
or electric shock could occur if the insulation on an extension cord
becomes damaged. Fatal electrical shock could occur if the extension
cord falls into the water.
s
WARNING
!
with an automatic resetting thermal protector and may restart
unexpectedly. Protector tripping is an indication of motor
overloading/overheating, which can be caused by application issues
such as an obstructed pump impeller, pump running dry, pump air-
locked, pump short cycling, excessively high or low voltage supply, or
possibly a pump, motor, bearings or seal that have reached the end of
their useful life.
s
WARNING
!
water during normal operation. Water may also be present in the
surrounding area of the pump. Caution must be used to prevent
bodily injury when working near the pump:
a. Electrical power should be disconnected prior to touching,
servicing or repairing the pump.
b. To minimize possible fatal electrical shock hazard, extreme
care should be used when changing fuses. Do not stand
in water while changing fuses or insert your finger into
the fuse socket.
s
WARNING
!
surface temperature of the pump will rise to a high level. This high
level could cause skin burns if the pump is touched and will cause
serious damage to your pump. For optimal cooling and to prolong the
motor life, the liquid level being pumped should normally be above
the top of the pump housing.
s
WARNING
!
housing is sealed. Use of oil could cause serious electric shock and/or
permanent damage to the pump.
s
CAUTION
!
THIS PUMP HAS BEEN EVALUATED FOR USE WITH WATER ONLY.
RISK OF ELECTRIC SHOCK AND FIRE
The pump motor is equipped
The pump is immersed in
Do not run the pump dry. The
Do not oil the motor. The pump
3