ADDITIONAL PARTS
Part No.
Description
599002
SA-1 Sacrifical Anode
For automatic operation:
Part No.
Description
14942904
Vertical float switch with 10' cord
640171
Tethered float switch with 10' cord
1
TROUBLESHOOTING
Problem
Pump not plugged in.
Circuit breaker shut-off or fuse removed.
Corroded plug.
Pump does not turn on
Tripped overload.
Defective switch.
Defective motor.
Impeller jammed.
Pump runs but does not
Lift too high for pump.
discharge liquid
Inlet to impeller plugged.
Lift too high for pump.
Partially blocked inlet.
Pump does not deliver
rated capacity
Impeller or discharge pipe is clogged.
Impeller wear due to abrasives.
6
All manuals and user guides at all-guides.com
Item No.
1
Item No.
2
3
Probable Causes
2
Corrective Action
Plug in pump.
Turn on circuit breaker or replace fuse.
Clean prongs.
Allow pump to cool, investigate cause (i.e. jammed impeller).
Replace switch.
Replace pump.
Clean impeller. See Maintenance section.
Check rated pump performance.
Pull pump and clean.
Check rated pump performance.
Clean inlet.
Pull pump and clean. Check hose for kinks or blockage.
Replace pump.
3