SEVERIN AT 2286 Instrucciones De Uso página 12

Automatic switch-off
This appliance comes with an automatic
switch-off feature. If a bread slice should
become stuck and cannot be ejected
after the toasting cycle is complete, the
toaster will automatically switch off. Should
this occur, disconnect the appliance
from the mains and remove the bread
slice as described in the section General
information.
Adjusting the degree of browning
The desired degree of browning can be
varied by turning the adjustable browning
control knob.
Light: turn the control knob anti-clockwise.
Dark: turn the control knob clockwise.
In the case of sliced bread specifically
intended for toasting, we recommend
setting the browning control to position 4.
Operation
∙ Insert the plug into the wall socket.
∙ After adjusting the browning control,
insert the bread into the toast slot and
press the operating lever down.
∙ Once the desired degree of browning
is reached, the toaster switches off
automatically and the slices are ejected.
∙ To achieve regular browning when
toasting several slices in succession,
allow the toaster to cool down for 60 - 90
seconds after each cycle.
∙ Do not cover the toast slot during
operation.
12
Interrupting the toasting cycle
If you want to interrupt the toasting cycle,
press the eject button ( ). The toaster will
switch off and the slices are ejected.
Warming up rolls, buns etc
∙ To warm up buns, rolls or other bakery
items, push the slide control operating
lever for the warming top all the way
down to raise the bread roll holder.
∙ Place the items to be warmed up on
the top, adjust the browning control to a
medium setting and then push down the
operating lever to switch on the toaster.
∙ Once the browning cycle is complete
and the appliance has automatically
switched off, turn the roll or bread over
and repeat the cycle.
∙ After use, return the bread roll holder
to its rest position by pushing the slide
control back up.
∙ Do not place the items directly on the
toast slot.
Cleaning and care
∙ Before cleaning the appliance, ensure it
is disconnected from the power supply
and has cooled down completely.
∙ To avoid the risk of electric shock, do not
clean the toaster with water and do not
immerse it in water.
∙ Do not use abrasives or harsh cleaning
solutions.
∙ The housing may be wiped with a dry or
slightly damp lint-free cloth.