VITO PRO-POWER vikmf218a Manual De Instrucciones página 23

EN
7) Loosen collet nut then insert
the shank of the accessory into
the collet.
8) Tighten the collet nut and check
all fittings to ensure they are
securely fastened.
Controls
Variable Speed Dial
Scroll through the variable speed
dial to select the appropriate speed.
NOTE: The higher the number on
the variable speed dial the faster the
oscillation frequency of the rotary
tool.
On/Off Switch
To turn on, set the variable speed
dial to 1 then push the on/off switch
to "1".
To turn off, set the variable speed
dial to 1 then push the on/off switch
to "0".
Operating the Rotary Tool
1) Turn the rotary tool on.
2) Select the appropriate speed
for the application.
3) For high precision applications
such as engraving or milling,
hold the rotary tool like a pen.
4) For heavy work like cutting or
grinding, hold the rotary tool in
the palm of your hand.
5) Gently apply the tip of the
accessory to the work piece.
23