Oster GCSTCC5000 Manual De Instrucciones página 23

Idiomas disponibles

This feature automatically turns the iron off if left in one position too long to avoid

accidents.

IF YOU LEAVE IRON ON:

• Horizontally without moving it, or accidentally tip the iron over, it will automatically stop

heating after 30 seconds. The green light blinks when auto-off is activated.

• Vertically (on its heel rest) without moving it, the iron will automatically turn off after 15

minutes. The green light blinks when auto-off is activated.

IMPORTANT: When the auto-off feature has been activated, the indicator light will blink.

TO RESET: Move iron back and forth and reheat until the "Ready" Indicator Light turns

solid green.

NOTE: The 3-way auto-off feature only works when the iron is in corded mode.

1. To turn off the iron, move the Steam Lever to Dry

WARNING: NEVER yank power cord when unplugging iron. This can damage the cord.

2. If you do not use your iron on a daily basis, empty the water reservoir after each use

for a longer iron life. To do so, unplug the iron, turn the iron upside down, open the

Water Fill Hole Cover, and allow water to flow from the Fill Hole. Shake the iron gently

to remove trapped water drops.

1. Unplug iron and allow to cool.

2. Empty water reservoir after each use and move Steam Lever to the Dry

3. Loosely loop the power cord around the iron and store iron in vertical position on the

charging base .

CAUTION: Wrapping the cord around the charging base too tightly can damage the cord.

GCSTCC5000_22SEPM1 (LA).indd 9

3-Way Auto-Off Feature

Caring For Your Iron After Use

Storing Your Iron

English - 9

setting and unplug the iron.

setting.

2022/9/14 10:35 AM