Publicidad
Idiomas disponibles
Idiomas disponibles
For example, press "POTATO" once, "1" will appear. (b) Press START/30+SEC" to cook,
the sound will sound 1 time, when the sound is over it will sound 5 times and then return to
standby.
10. Pizza
(a) Press "PIZZA" repeatedly until the number you want appears on the display. "4.0",
"8.0", "14.0" will appear in order. For example, press PIZZA once and "4.0" will appear.
b) Press START/30+SEC" to cook, the sound will sound 1 time, when the sound ends it
will sound 5 times and then return to standby.
11. Beverage
(a) Press "BEVERAGE" repeatedly until the number you want appears on the display. "1",
"2", "3" cups will appear in order. One cup is approximately 120ml. For example, press
"Beverage" once and "1" will appear.
b) Press START/30+SEC" to cook, the sound will sound 1 time, when the sound is over it
will sound 5 times and then return to standby.
12. Dinners
(a) Press "DINNER PLATE" repeatedly until the number you wish to remove appears on
the display. "9.0", "12.0", "18.0" Oz will appear in order.
For example, press "DINNER PLATE" once and "9.0" will appear.
b) Press START/30+SEC" to cook, the sound will sound 1 time, when the sound is over it
will sound 5 times and then return to standby.
13. Frozen Vegetables
(a) Press "FROZEN VEGETABLE" repeatedly until the number you want to remove appears
on the display. "4.0", "8.0", "16.0" Oz will appear in order.
For example, press "FRESH VEGETABLE" once and "4.0" will appear.
b) Press START/30+SEC" to cook, the sound will sound 1 time, when the sound is over it
will sound 5 times and then return to standby.
14. Memory function
1. Press "0/MEMORY" to select memory setting, function 1 to 3.
2. If the setting has been programmed, press "START/+30SEC" to use it. If not, continue
until the configuration is chosen. Only 1 or 2 attempts are allowed.
3. After completing the setting, pressing 0/MEMORY once to save the setting will return to
the standby mode. Pressing "START/+30SEC" again will save the setting and start
cooking.
Note: Menu auto cooking cannot be set as a memory function.
Example: to program the following setting as the second memory for cooking food with
80% of the oven power for 3 minutes and 20 seconds The steps are as follows:
1. In waiting states, press "0/MEMORY" twice, stop pressing until the screen displays "2".
2.Press
"TIME
COOK" once, then press "3", "2", "0" in order.
3. Press "POWER" once, "PL10" displays, then press "8" and "PL8" displays.
4. Press "START/+30SEC." to save the setting. Buzzer sounds once and the screen will
display "2". If you press
memory 2 and operated.
5. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
6. If you want to run the saved procedure, in waiting state, press "0/MEMORY" twice,
screen displays "2", then press "START/+30SEC." to run.
15. Multi Phase Cooking
A maximum of 2 programs can be selected for cooking. In multi-stage cooking, if one
stage is defrosting, then defrosting will automatically switch to the first stage.
Note: Auto Cooking will not work in Multi-Stage cooking.
"START/+30SEC."
again, the procedure will be saved as the
E ng l is h -11
Publicidad
