Descargar Imprimir esta página

Fein CCG18-115BLPD-SEC Instrucciones De Uso página 27

Publicidad

Idiomas disponibles

Idiomas disponibles

en
27
Cleaning contact surfaces (figure 15).
Fig. 15
Contact surface
Clean the contact surfaces on the power
tool at regular intervals before adjusting the
handle.
Warranty and liability.
The warranty for the product is valid in accordance with the legal regulations in the country
where it is marketed. In addition, FEIN also provides a guarantee in accordance with the
FEIN manufacturer's warranty declaration.
Not all accessories described or shown in this instruction manual will be included with your-
power tool.
Environmental protection, disposal.
Packaging, worn out power tools and accessories should be sorted for environmental-
friendly recycling.
Dispose of batteries only when discharged.
For batteries that are not completely discharged, insulate the terminals with tape as a pro-
tective measure against short-circuiting.
Transport.
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation require-
ments. The user can transport the batteries by road without further requirements.
When being transported by third parties (e.g.: air transport or forwarding agency), special
requirements on packaging and labelling must be observed. For preparation of the item
being shipped, consulting an expert for hazardous material is required.
Dispatch batteries only when the housing is undamaged and no liquid is escaping from the
battery. Make sure that the battery contacts are not short-circuited. Use the original pack-
aging. Pack up the battery in such a manner that it cannot move around in the packaging.
Please also observe possibly more detailed national regulations.

Publicidad

loading

Este manual también es adecuado para:

Ccg18-125blpd-sec