Publicidad
Idiomas disponibles
Idiomas disponibles
en
8
Do not rivet or screw any name-plates or
signs onto the power tool. If the insulation is
damaged, protection against an electric
shock will be ineffective. Adhesive labels are
recommended.
Always work with the auxiliary handle. The
auxiliary handle ensures reliable guiding of
the power tool.
Never look or stare into the light of the
power tool's lamp from a short distance.
Never point the light of the lamp into the
eyes of other persons in close vicinity. The
radiation produced by the lamp can be
harmful for the eye.
After working gypsum-containing materials:
Blow out the ventilation openings of the
power tool and the switch element with dry
and oil-free compressed air. Otherwise,
gypsum-containing dust can settle in the
power tool housing and switch element,
which can harden in connection with humid-
ity. This can impair the switching mecha-
nism.
Use and handling of the battery (bat-
tery pack)
To avoid hazardous situations such as burns,
fire, explosion, skin injuries, and other inju-
ries when handling the battery, observe the
following instructions:
Batteries must not be disassembled, opened
or reduced in size. Do not subject batteries
to mechanical impact or shock. Hazardous
vapours and fluid can escape in case of dam-
age and improper use of the battery. The
vapours can irritate the respiratory system.
Liquid ejected from the battery may cause
skin irritations or burns.
When battery fluid from a damaged battery
has come into contact with objects close by,
check the respective components, clean
them or replace them as required.
Keep the battery away from heat and fire. Do
not store the battery in direct sunlight.
Do not remove the battery from its original
packaging until it is going to be used.
Before any work on the machine itself,
remove the battery from the power tool. If
the power tool accidentally starts, there is
danger of injury.
Remove the battery only when the power
tool is switched off.
Keep the battery away from children.
Keep the battery clean and protect it against
moisture and water. Clean contaminated
battery terminals and power tool connec-
tions with a dry, clean cloth.
Charge the batteries only with battery char-
gers recommended by the manufacturer. A
charger that is suitable for one type of bat-
tery may create a risk of fire when used with
another battery.
Keep the battery not being used away from
paper clips, coins, keys, nails, screws or
other small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Remove the power tool's battery during
transport and storage.
Use only intact original FEIN batteries that
are intended for your power tool. When
working with and charging incorrect, dam-
aged, repaired or reconditioned batteries,
imitations or other brands, there is danger
of fire and/or explosion.
Follow the safety warnings in the operating
instructions of the battery charger.
Publicidad
